English

How to Increase Image Resolution Without Losing Quality

A small blurry photo placed next to a sharp large print of the same scene

Can you increase image resolution?

Yes, you can add pixels to an image, but you can’t recover detail that the camera never recorded. Upscaling creates new pixels by estimating them from the pixels around them, so the picture gets bigger without getting more informative.

Bilinear interpolation estimates each new pixel from a 2 x 2 neighbourhood, and bicubic interpolation uses a 4 x 4 neighbourhood. Wikipedia’s page on bicubic interpolation notes that bicubic keeps more fine detail than bilinear, yet it still can’t recover fine details (Wikipedia: Bicubic interpolation). The GIMP manual says the same thing in plainer terms: interpolation fills gaps when you enlarge, and the more you enlarge, the more blurred the image becomes (GIMP Documentation: Scale Image).

So the honest answer has 2 parts. More pixels are possible, and more real detail isn’t. A 1,200 x 800 pixel photo (0.96 megapixels) upscaled to 2,400 x 1,600 pixels (3.84 megapixels) has 4 times the pixels and the same amount of information. The megapixel calculator shows the pixel count for any width and height.

Big upscales cost more than people expect, because pixels grow with the square of the factor. A 2x upscale gives 4 times the pixels, 3x gives 9 times, and 4x gives 16 times. A 12 megapixel photo upscaled 4x in each direction would be 192 megapixels, which is above the 128 megapixel limit Adobe lists for Super Resolution. It’s one more reason to keep the factor small.

Changing DPI vs adding pixels

Changing DPI relabels the same pixels, while adding pixels resamples the image. Only the second changes how many pixels a file has.

Adobe explains the split in Photoshop: with Resample off, the pixel dimensions are locked and only the physical size or the pixels/inch value can change, and with Resample on, Photoshop builds new pixels (Adobe: Image size, resolution, and resampling in Photoshop). The steps are in how to change DPI in Photoshop.

Here’s the difference for the 1,200 x 800 pixel photo:

Changing DPI vs adding pixels
ActionPixelsPixels per inchPrint size
Original1,200 x 8003004 x 2.67 in
Lower the DPI to 150 (Resample off)1,200 x 8001508 x 5.33 in
Upscale 2x (Resample on)2,400 x 1,6003008 x 5.33 in

You can run the same check on any file. Divide the pixel width by the print width in inches, and you’ve got the real DPI. A 2,400 pixel wide file printed 12 inches wide is 200 DPI (2,400 / 12), and it’s 100 DPI at 24 inches wide.

The second and third rows print at the same size, but they aren’t equal. The second row has 150 real pixels per inch, and the third reaches 300 pixels per inch with pixels that were estimated. Pick the label change when 150 DPI is acceptable for the viewing distance, and upscale when a printer insists on 300.

How do upscalers work and when are they good enough?

Upscalers work in 2 ways: classic interpolation (bilinear, bicubic) averages nearby pixels, and enhancement tools such as Adobe’s Super Resolution output 2x the linear resolution. Adobe states that Super Resolution gives an image 2x the width and 2x the height, which is 4x the total pixel count (Adobe: Use Raw Details and Super Resolution in Adobe Camera Raw).

Adobe lists these limits for Super Resolution:

  • It supports raw files, JPEG and TIFF files.
  • Each image can be enhanced only once.
  • Images above 128 megapixels, or with a side over 32,500 pixels, aren’t supported.
  • The result is saved as a new DNG file next to the original.
  • It’s unavailable in the Camera Raw filter inside Photoshop, so you open the file with File > Open.

How many pixels does your print need?

Work backwards before you pick a tool. Multiply the print size in inches by the DPI, and you’ve got the pixel target. For a 16 x 20 inch print, the numbers are:

How many pixels does your print need?
DPIPixels neededMegapixels
3004,800 x 6,00028.8
1502,400 x 3,0007.2

A 12 megapixel phone photo (4,000 x 3,000 pixels) already covers the 150 DPI target, but it falls 2,000 pixels short of 300 DPI on the 20 inch edge. A 1.6x upscale would close that gap, because 4,000 x 1.6 = 6,400 and 3,000 x 1.6 = 4,800. Smaller factors mean less invented detail, so don’t jump to 4x when 1.6x does the job.

Here’s a simple test. Zoom to 100% and look at a hard edge. If it’s stair-stepped or smeared, don’t send the file. You’ll save a reprint, and you won’t wonder why the print looks soft. It’s the same check a print shop makes by eye, and it’s free.

Is it good enough? That depends on the viewing distance and the content. Text, faces and fine patterns are where invented detail gets noticed first, so zoom to 100% and look at those areas before you send a file to print. A file full of compression blocks gives any upscaler poor input.

How big can you print after upscaling?

After a 2x upscale you can print at twice the width and height at the same DPI, or at the same size with twice the DPI. The pixel count decides it, so divide pixels by DPI to get inches.

How big can you print after upscaling?
SourcePixelsMax print at 300 DPIMax print at 150 DPI
1,600 x 1,200 (1.92 MP)original5.33 x 4 in10.67 x 8 in
1,600 x 1,200 upscaled 2x3,200 x 2,400 (7.68 MP)10.67 x 8 in21.33 x 16 in
4,000 x 3,000 (12 MP)original13.33 x 10 in26.67 x 20 in

In centimetres, the 4,000 x 3,000 file prints at 150 DPI as 67.7 x 50.8 cm. Enter your own numbers in the pixels to print size calculator or the DPI calculator.

Better options: reshoot, find the original, vector

The 3 better options are to reshoot at a higher resolution, to find the original file, or to redraw the artwork as vector. None of them depends on guessing new pixels.

Reshooting isn’t always possible, but when it is, it’s the cleanest fix. If you’ve still got access to the original scene, a new frame at full size beats any upscale, and you’ll skip the guesswork.

  1. Reshoot or rescan. Set the camera to its largest size and shoot again, or scan the print at a higher setting. A 24 megapixel camera frame is 6,000 x 4,000 pixels, which prints 20 x 13.33 inches at 300 DPI.
  2. Find the original. The copy you downloaded may be a smaller version of a larger file. Ask the photographer or designer for the source file, and check its pixel size with the megapixel calculator.
  3. Use vector for logos and line art. Vector shapes scale to any size without a pixel limit. Illustrator’s Image Trace converts a raster image into vector artwork, but Adobe warns that tracing photos for infinite scaling doesn’t work well, since a traced photo may look acceptable small and then deteriorate quickly when scaled up (Adobe: Image Trace best practices). Adobe also notes that gradients split into many solid-colour shapes when traced, so flat-colour artwork traces best.

The difference between vector and raster images explains why a logo can be redrawn while a photo can’t. The FeetToPixels homepage links every converter you need to plan the final size.

Frequently asked questions

Does increasing DPI improve quality?

No. Raising the DPI value with resampling off only changes the print size, and the pixels stay identical. Quality improves only when the image has more real pixels, which means a better source file.

Do AI upscalers add real detail?

No. A tool that adds pixels the camera never recorded can't know the true detail of the scene, so any new detail is a prediction. That's fine for a social post and risky for a document or a portrait.

How much can you upscale?

Each 2x upscale doubles the width and the height, which gives 4 times the pixels. Upscale by the smallest factor that reaches the pixel count your print size needs, and check the result at 100% zoom.

Can Adobe Super Resolution be applied twice?

No. Adobe says an image can be enhanced only once, and that you can't reapply Raw Details or Super Resolution to an already enhanced image.

Is a bigger megapixel count always sharper?

No. Megapixels count pixels, not sharpness. A blurry 24 megapixel file can look worse than a sharp 6 megapixel one, so check focus and compression as well as the pixel count.

Last updated: