DPI calculator
Find the DPI an image will print at from its pixels and print size, or flip it and get the pixels a print needs at any DPI. The gauge and the magnified patch show what that density means on paper.
Print quality at this DPI
Sharp at arm's length. This is the photo and print standard.
A 0.1 inch patch, one dot per pixel
How does the DPI calculator work?
DPI = pixels / inches. In "Find the DPI" mode the tool divides the image width in pixels by the print width you enter; in "Find the pixels" mode it runs the formula backwards, pixels = inches x DPI.
A 3,000 x 2,000 pixel photo printed 10 inches wide is 3,000 / 10 = 300 DPI, and you'll get a height of 2,000 / 300 = 6.67 inches. Switch the unit to centimeters and the tool divides by 2.54 first, so 25.4 cm wide gives the same 300 DPI. The gauge marks where that value sits between soft and fine-art density, and the patch draws one dot per pixel in a 0.1 inch square: 30 x 30 dots at 300 DPI, only 7 x 7 at 72 DPI.
DPI calculator chart: DPI to pixels
Here's how common sizes in inches turn into pixels at five standard DPI values. Read across for a size, down for a DPI.
| Inches | 72 DPI | 96 DPI | 150 DPI | 300 DPI | 600 DPI |
|---|---|---|---|---|---|
| 1 | 72 px | 96 px | 150 px | 300 px | 600 px |
| 2 | 144 px | 192 px | 300 px | 600 px | 1,200 px |
| 4 | 288 px | 384 px | 600 px | 1,200 px | 2,400 px |
| 5 | 360 px | 480 px | 750 px | 1,500 px | 3,000 px |
| 6 | 432 px | 576 px | 900 px | 1,800 px | 3,600 px |
| 8 | 576 px | 768 px | 1,200 px | 2,400 px | 4,800 px |
| 10 | 720 px | 960 px | 1,500 px | 3,000 px | 6,000 px |
| 11 | 792 px | 1,056 px | 1,650 px | 3,300 px | 6,600 px |
300 DPI is the column most print jobs use: 4 inches is 1,200 pixels, 8 inches is 2,400 and 11 inches is 3,300. For a size in feet, centimeters or millimeters, use the inches to pixels converter and switch the unit.
Which DPI should you use for print and screen?
Match DPI to viewing distance: 300 for anything held in your hands, 150 for posters and as low as 10 to 30 for billboards. Your eye can only resolve so much detail at a given distance; extra dots beyond that won't show, they'll just make the file bigger.
| Use | DPI | Why |
|---|---|---|
| Web and screen | 72 to 96 | Screens care about pixel size, not DPI |
| Photo prints (4x6, 8x10) | 300 | Held in your hands at reading distance |
| Brochures, flyers, books | 300 | Small text has to stay crisp up close |
| Framed wall prints | 200 to 240 | Seen from a step or two back |
| Posters and pull-up banners | 150 | Read from a few feet; half the file of 300 |
| Large banners and vehicle wraps | 100 to 150 | Viewed from across a room or street |
| Billboards | 10 to 30 | Viewed from hundreds of feet |
| Fine-art reproduction, line-art scans | 600 | Detail you inspect up close or enlarge later |
Large-format work's the clearest example. A 10 foot banner at 300 DPI would be 36,000 pixels wide and weigh gigabytes, yet from 15 feet away it looks no sharper than the same banner at 100 DPI. For LED screens the measure switches to pixel pitch; the LED wall calculator handles that.
DPI vs PPI: what's the difference?
PPI counts pixels in a digital image or on a screen; DPI counts ink dots a printer lays on paper. For sizing a file the two convert one to one, which is why most editors label the same field "resolution" and accept either word.
| Aspect | PPI (pixels per inch) | DPI (dots per inch) |
|---|---|---|
| What it counts | Pixels in an image file or on a screen | Ink dots a printer lays on paper |
| Where you set it | Image editor, camera, export settings | Printer driver and press hardware |
| Typical values | 72, 96, 150, 300 | 300 to 2,400 on the device |
| For sizing math | 1 PPI = 1 DPI | 1 DPI = 1 PPI |
So converting PPI to DPI takes no math: a 300 PPI file is a 300 DPI file for sizing. The trap is the printer spec sheet. A printer rated at 1,200 or 2,400 DPI uses several ink dots to draw each image pixel; that number is the hardware's, and you shouldn't type it into your file. Keep the image at 300 PPI and let the printer do the rest. For screens, where only PPI applies, see the PPI calculator.
How to check the DPI of an image with the DPI calculator
- Find the image's pixel width and height in your file's properties or your editor's image size dialog.
- Decide how wide it'll print, in inches or centimeters.
- Enter both in the tool above; the result is the DPI it'll actually print at.
Ignore the DPI number stored in the file's metadata. It's only a tag, and changing it without resampling doesn't add or remove a single pixel. What counts is pixels divided by print size. To see every print size a file can handle at once, try the pixels to print size calculator.
DPI calculator FAQs
How do you calculate DPI?
Divide the image width in pixels by the print width in inches. A 3,000 pixel wide image printed 10 inches wide is 300 DPI. Use the height instead and you'll get the same answer if the print keeps the image's shape.
How many pixels is 300 DPI?
300 DPI is 300 pixels in every inch. A 1 inch square is 300 x 300 pixels, a 4 x 6 inch print is 1,200 x 1,800 pixels and an 8 x 10 is 2,400 x 3,000 pixels.
How do you convert DPI to pixels?
Multiply the size in inches by the DPI: pixels = inches x DPI. DPI on its own isn't a pixel count; it needs a physical size to turn into one.
Is PPI the same as DPI?
No. PPI counts pixels in an image or on a screen and DPI counts ink dots a printer lays down. For sizing a file they convert one to one, so 300 PPI and 300 DPI give the same pixel count.
Is 72 DPI good enough for printing?
No. 72 DPI is an old screen baseline, and a print at 72 DPI looks soft and blocky in your hand. Use 300 DPI for close-up print and at least 150 DPI for posters.
Does changing the DPI in Photoshop change image quality?
No, not on its own. If you change the DPI without resampling, the pixels stay the same and only the print size changes. Quality changes only when the pixel count changes.
What DPI is best for printing?
300 DPI for anything read or viewed up close, 150 to 200 DPI for posters and wall prints, and as low as 10 to 30 DPI for billboards seen from far away.
Why can billboards use such a low DPI?
Because nobody sees them up close. From hundreds of feet away the eye can't separate large dots, so 10 to 30 DPI looks sharp and keeps the file a sane size.
Last updated: