English
Feet + inches

Feet and inches to pixels

Type feet and inches in their own boxes, pick a DPI, and you'll get the exact pixels. No decimal feet, no mental math. If you're sizing a banner or sign measured like 2 ft 6 in x 6 ft, switch to width x height.

Resolution (DPI)
6,336 px
5 ft 6 in = 66 in = 5.5 ft at 96 DPI
pixels = (5 ft x 12 + 6 in) x 96 DPI

On a tape measure (pixel count at each foot)

How do you convert feet and inches to pixels?

Convert everything to inches, then multiply by the DPI: pixels = (feet x 12 + inches) x DPI. 5 ft 6 in is 5 x 12 + 6 = 66 inches. At 96 DPI that's 66 x 96 = 6,336 pixels; at 300 DPI it's 19,800 pixels.

The tool works in this order so nothing's rounded early. It adds the inches to the feet first, shows the total in inches and decimal feet, and doesn't apply the DPI until then. The tape measure under the result marks every foot with its pixel count, so you'll see where 66 inches lands between the 5 and 6 foot marks.

Feet and inches to pixels chart

Here's a set of common lengths written in feet and inches, at 96, 150 and 300 DPI.

Feet and inches to pixels chart
LengthInches96 DPI150 DPI300 DPI
1 ft 6 in181,7282,7005,400
2 ft 6 in302,8804,5009,000
3 ft 4 in403,8406,00012,000
4 ft 6 in545,1848,10016,200
5 ft 0 in605,7609,00018,000
5 ft 6 in666,3369,90019,800
5 ft 10 in706,72010,50021,000
6 ft 0 in726,91210,80021,600
6 ft 2 in747,10411,10022,200
6 ft 8 in807,68012,00024,000
7 ft 6 in908,64013,50027,000
8 ft 6 in1029,79215,30030,600

A 2 ft 6 in roll-up banner width is 30 inches, so it's 4,500 pixels at 150 DPI, the density most sign shops ask for.

Why not type feet and inches as a decimal?

Because inches aren't tenths of a foot, they're twelfths: 5 ft 6 in is 5.5 ft, not 5.6 ft. The decimal habit is the most common sizing mistake with feet and inches, and it's enough to throw the pixel count off.

Why not type feet and inches as a decimal?
You meanCorrect feetWrong entryError at 300 DPI
5 ft 6 in5.55.6360 px
3 ft 4 in3.3333.4240 px
6 ft 9 in6.756.9540 px

Separate boxes mean it can't happen. If you've only got a decimal length, the feet to pixels converter takes decimal feet directly.

Feet and inches to pixels for banners and signs

Use 100 to 150 DPI for a banner measured in feet and inches, and you'll want to enter width and height separately. A 2 ft 6 in x 6 ft 6 in roll-up stand is 30 x 78 inches, so it's 4,500 x 11,700 pixels at 150 DPI, about 52.7 megapixels.

If a size you've got only comes in square feet, such as a wall area, use the square feet to pixels tool. For a print you've already got pixels for, check how big it'll print with the pixels to print size calculator.

Feet and inches to pixels FAQs

How do you convert feet and inches to pixels?

Turn the length into inches, then multiply by the DPI: pixels = (feet x 12 + inches) x DPI. 5 ft 6 in is 66 inches, so it's 6,336 pixels at 96 DPI.

Is 5 ft 6 in the same as 5.6 feet?

No. 6 inches is half a foot, so 5 ft 6 in is 5.5 feet. If you type 5.6, you've added 1.2 inches, which is 115 extra pixels at 96 DPI and 360 at 300 DPI.

How many pixels is 6 feet 2 inches?

6 ft 2 in is 74 inches: 7,104 pixels at 96 DPI, 11,100 pixels at 150 DPI and 22,200 pixels at 300 DPI.

How many pixels is 1 foot 6 inches?

1 ft 6 in is 18 inches: 1,728 pixels at 96 DPI and 5,400 pixels at 300 DPI.

Can I enter fractions of an inch?

Yes. Type decimals in the inches field, such as 6.5 for 6 1/2 inches or 3.25 for 3 1/4 inches. Feet don't need decimals.

Which DPI should I use for feet and inches?

Use 300 DPI for prints held close, 100 to 150 DPI for banners and signs seen from a few feet, and 96 DPI for screen layouts.

How do I convert pixels back to feet and inches?

Divide the pixels by the DPI and you've got inches; then split them: whole feet = inches / 12 rounded down, and the rest is inches. 6,336 px at 96 DPI is 66 inches, which is 5 ft 6 in.

Last updated: