Feet to pixels 300 DPI
At 300 DPI, every foot is 3,600 pixels. Enter a print size in feet and you'll get the canvas, the megapixels and the file size, and you'll see at once whether Photoshop can open it or you're better off at 150 DPI.
Will Photoshop open it? (longest side)
300 DPI vs 150 DPI, same print, pixel area to scale
How many pixels is a foot at 300 DPI?
A foot is 3,600 pixels at 300 DPI: 12 inches x 300 pixels per inch. So the whole conversion's one multiplication, pixels = feet x 3,600. A 3 ft wide print is 10,800 pixels and a 5 ft tall one's 18,000 pixels.
The tool runs that for width and height, then adds the 3 things you'll run into with a 300 DPI file: the megapixel count, the uncompressed file size and Photoshop's size limits. The meter marks the longest side against the PSD limit of 30,000 pixels and the PSB limit of 300,000 pixels.
Feet to pixels 300 DPI chart
Here's each length in feet at 300 DPI, with the same length in meters if you're working from a metric print spec.
| Feet | Meters | Pixels at 300 DPI | Fits a PSD? |
|---|---|---|---|
| 1 ft | 0.305 m | 3,600 | Yes |
| 1.5 ft | 0.457 m | 5,400 | Yes |
| 2 ft | 0.61 m | 7,200 | Yes |
| 2.5 ft | 0.762 m | 9,000 | Yes |
| 3 ft | 0.914 m | 10,800 | Yes |
| 4 ft | 1.219 m | 14,400 | Yes |
| 5 ft | 1.524 m | 18,000 | Yes |
| 6 ft | 1.829 m | 21,600 | Yes |
| 7 ft | 2.134 m | 25,200 | Yes |
| 8 ft | 2.438 m | 28,800 | Yes |
| 10 ft | 3.048 m | 36,000 | No, use PSB |
| 12 ft | 3.658 m | 43,200 | No, use PSB |
Common print sizes in feet to pixels at 300 DPI
A 2 x 3 ft poster is 7,200 x 10,800 pixels at 300 DPI, and a 4 x 8 ft sheet is 14,400 x 28,800. Here's each common size with its megapixels and uncompressed file size.
| Size | Pixels | Megapixels | File size (RGB) |
|---|---|---|---|
| 1 x 1 ft | 3,600 x 3,600 | 13 MP | 37 MB |
| 1 x 2 ft | 3,600 x 7,200 | 25.9 MP | 74 MB |
| 2 x 3 ft | 7,200 x 10,800 | 77.8 MP | 222 MB |
| 2 x 4 ft | 7,200 x 14,400 | 103.7 MP | 297 MB |
| 3 x 4 ft | 10,800 x 14,400 | 155.5 MP | 445 MB |
| 3 x 5 ft | 10,800 x 18,000 | 194.4 MP | 556 MB |
| 4 x 6 ft | 14,400 x 21,600 | 311 MP | 890 MB |
| 4 x 8 ft | 14,400 x 28,800 | 414.7 MP | 1.16 GB |
| 5 x 7 ft | 18,000 x 25,200 | 453.6 MP | 1.27 GB |
| 8 x 8 ft | 28,800 x 28,800 | 829.4 MP | 2.32 GB |
File sizes are for a flat 8-bit RGB image before it's compressed. Layers, 16-bit color and CMYK don't shrink them; they make them bigger.
When is 300 DPI too much for feet-sized prints?
300 DPI is too much once people view the print from more than an arm's length away. Your eye can't resolve 300 pixels per inch from 3 feet back, so banners, trade-show walls and signs look the same at 100 to 150 DPI with a far smaller file.
- 300 DPI: posters up to about 2 x 3 ft, menus, art prints and anything read up close.
- 150 DPI: roll-up banners, trade-show graphics and signs read from 3 to 10 feet.
- 100 DPI: large vinyl banners and wall graphics read from across a room.
- 10 to 30 DPI: billboards read from the road.
For any other density, use the feet to pixels converter; it'll take any DPI or LED pitch.
Feet to pixels 300 DPI FAQs
How many pixels is 1 foot at 300 DPI?
1 foot is 3,600 pixels at 300 DPI. A foot's 12 inches, and 12 x 300 = 3,600.
How many pixels is 6 feet at 300 DPI?
6 feet is 21,600 pixels at 300 DPI (6 x 3,600). That's under Photoshop's 30,000 pixel PSD limit, which a 300 DPI print only passes above 8 ft 4 in.
How many pixels is 10 feet at 300 DPI?
10 feet is 36,000 pixels at 300 DPI. That's past Photoshop's 30,000 pixel PSD limit, so save it as a PSB file or use 150 DPI (18,000 pixels).
Do I need 300 DPI for a banner?
No. Banners aren't read up close, so 100 to 150 DPI looks just as sharp and makes a file 4 to 9 times smaller. Save 300 DPI for prints you'll hold or stand right next to.
What is the largest print Photoshop can open at 300 DPI?
A normal PSD file can't go past 30,000 pixels a side, which is 8 ft 4 in at 300 DPI. A Large Document (PSB) goes to 300,000 pixels, about 83 ft 4 in.
How big is a 4 x 8 ft file at 300 DPI?
It's 14,400 x 28,800 pixels, about 415 megapixels and 1.16 GB uncompressed. The same sheet at 150 DPI is 7,200 x 14,400 pixels and it's a quarter of the size.
Is 300 DPI the same as 300 PPI?
Yes, for sizing a file. Both mean 300 pixels in every inch of the print, so 1 foot is 3,600 pixels whichever label your software shows.
Last updated: