English

How to Change DPI in Illustrator and GIMP (Step by Step)

A designer's desk with a pen tablet and a vector logo shown on the monitor

Does Illustrator have DPI?

Illustrator artwork has no DPI because paths are vector, but Illustrator uses a resolution (ppi) whenever it creates pixels. That happens in 2 places: the Document Raster Effects Settings, and the resolution option when you export a PNG or JPEG.

Illustrator draws shapes from anchor points and curves, and those stay sharp at any size. Vector vs raster images covers that difference in full. Effects such as drop shadows and blurs are different, because they’re pixel-based and need a resolution.

Adobe’s rasterization page lists these resolution presets: Screen (72 ppi), Medium (150 ppi), High (300 ppi), Use Document Raster Effects Resolution, and Custom from 1 to 2,400 ppi (Adobe: Illustrator rasterization options). Higher values give sharper results and heavier files.

In practice, you don’t need to worry about DPI while you draw. You’re free to shrink a logo to business card size or stretch it across a banner, and it won’t get softer. It’s only at export that the pixel count matters, and that’s when you’ll choose the ppi.

How do you change DPI in Illustrator?

You change resolution in Illustrator through Effect > Document Raster Effects Settings, and again in the export dialog. Follow these steps:

  1. Choose Effect > Document Raster Effects Settings.
  2. Pick a Resolution preset (Screen, Medium or High) or enter a custom value.
  3. Click OK. Every raster effect in the document now uses that resolution.
  4. For a PNG or JPEG file, choose File > Export > Export As, pick the format, and set the Resolution in the options dialog that follows. Tick Use Artboards if you want each artboard saved as its own file (Adobe: Export artwork from Illustrator).

Adobe suggests selecting Screen while you edit and High when you prepare files for print. If an effect looks jagged in print, raise the setting to 300 ppi or higher.

Which setting controls what

It’s easy to mix the two settings up, so here’s the split:

  • Document Raster Effects Settings: controls the pixels in effects such as shadows and blurs inside the document. It doesn’t touch plain paths.
  • Export resolution: controls the pixel size of the PNG or JPEG file you create. The artboard in inches times this number gives the pixels.

An 8.5 x 11 inch artboard exported at 300 ppi is 2,550 x 3,300 pixels, and at 72 ppi it’s only 612 x 792 pixels. You’ll want the first for print and the second for a quick screen preview.

The pixel size of an export comes from the artboard size times the resolution. Here are three examples:

Which setting controls what
Artboard sizeResolutionExported pixels
6 x 4 in300 ppi1,800 x 1,200 px
6 x 4 in72 ppi432 x 288 px
3 x 2 ft (36 x 24 in)100 ppi3,600 x 2,400 px

Convert any size to pixels with the inches to pixels converter, and test your own numbers in the DPI calculator. The ppi you pick decides the file weight: that same 3 x 2 ft artboard at 300 ppi would be 10,800 x 7,200 pixels, which is 77.76 megapixels.

Common export mistakes

Three slips cause most soft prints, and they’re all avoidable:

  • Exporting at 72 ppi when the printer wants 300. A 6 x 4 inch artboard becomes 432 x 288 pixels instead of 1,800 x 1,200. That’s only 24% of the width you need.
  • Sending a PNG when the shop takes vector. If the printer accepts a PDF, you’d lose the sharpness a vector gives you for nothing.
  • Forgetting the raster effects setting. A shadow rasterized at a low ppi can look jagged beside crisp paths, and Adobe’s fix is a higher resolution.

How do you change DPI in GIMP?

You change DPI in GIMP with Image > Print Size, which sets the print resolution without touching the pixels. The GIMP manual describes the dialog, called “Set Image Print Resolution” (GIMP Documentation: Print Size).

Follow these steps:

  1. Open the image and choose Image > Print Size.
  2. Pick a unit in the drop-down beside Width and Height (inches, millimetres or others).
  3. Type the new X resolution. The chain icon links X and Y so the ratio stays the same, and you can click it to unlink them.
  4. Click OK.

Changing Width or Height updates the resolution values for you. The manual states that the command does not change the number of pixels and does not resample the image, and it adds that the output resolution isn’t the printer’s dpi, which is a separate printer feature.

A 3,000 x 2,000 pixel photo shows how it works:

How do you change DPI in GIMP?
Print resolutionPrint widthPrint height
30010 in (25.4 cm)6.67 in (16.9 cm)
15020 in (50.8 cm)13.33 in (33.9 cm)

The two commands do different jobs, and they’re easy to confuse. Take the 3,000 x 2,000 pixel photo again:

Print Size vs Scale Image in GIMP
CommandSettingPixels afterPrint size
Print Size600 resolution3,000 x 2,0005 x 3.33 in
Scale Image50% at 300 resolution1,500 x 1,0005 x 3.33 in

Both end at a 5 x 3.33 inch print, yet they don’t give the same file. Print Size keeps all 3,000 pixels and packs them tighter. Scale Image throws half of the pixels away. Use Print Size when you just want the right label, and use Scale Image when you need a different pixel count.

To change the pixel count, use Image > Scale Image instead. GIMP’s transform documentation lists interpolation methods named None, Linear, Cubic, NoHalo and LoHalo, and the available list depends on your GIMP version (GIMP Documentation: Transform Tools). Interpolation fills gaps when you enlarge an image, and it doesn’t add real detail.

A quick example shows the limit of Print Size. Say a printer wants an 8 x 10 inch print at 300 DPI, which means 2,400 x 3,000 pixels. Your file is 1,600 x 2,000 pixels. Print Size will happily label it 200 DPI, and that’s the honest number, since 1,600 / 8 = 200. It won’t create the missing 800 x 1,000 pixels. You’d need more source pixels, or you’d have to accept 200 DPI.

Which DPI should you export at?

Export at 300 ppi for close-up prints, 150 ppi for larger prints, and 72 to 96 ppi for screens. Adobe’s resizing reference lists 72 to 96 PPI for web and screen display and 150 to 300 PPI for standard printing (Adobe: Resize images in Photoshop).

Use this checklist:

  • Logo for a website: keep an SVG. A PNG fallback only needs pixel dimensions, because a browser maps 1 inch to 96 CSS pixels.
  • Logo for a business card: send a vector PDF if the printer accepts it. A raster file needs 300 ppi at the printed size.
  • Poster or banner: work out the width in inches (feet x 12), then multiply by the ppi your printer asks for. A 6 ft banner at 100 ppi is 7,200 pixels wide.
  • Photo edited in GIMP: set Print Size to the real print width, and use the 300 DPI page to confirm the pixel count.

That’s the whole workflow. You’ve set the label, you’ve checked the pixels, and you won’t be surprised at the print shop.

When the pixels run short, resizing up can’t add detail. The FeetToPixels homepage lists every converter, and the print-size tools show how far a file can go before you export.

Frequently asked questions

Is vector art affected by DPI?

No. Vector shapes are stored as paths, so they stay sharp at any size. DPI matters only when Illustrator turns artwork into pixels, for raster effects or for a PNG or JPEG export.

Does GIMP resample when changing DPI?

No. The GIMP manual states that Print Size does not change the number of pixels and does not resample the image. It changes only the printed size. Use Scale Image when you want to change the pixel count.

What DPI for a logo?

A vector logo has no DPI, so keep the master file as SVG, AI or PDF. When a PNG is needed, size it with pixels = inches x DPI, for example 1,800 x 1,200 pixels for a 6 x 4 inch print at 300 DPI.

What are Illustrator's raster effects resolution presets?

Adobe lists Screen at 72 ppi, Medium at 150 ppi and High at 300 ppi, plus a custom value up to 2,400 ppi. Adobe suggests Screen while you edit and High when the job goes to print.

Does a higher export resolution make a vector sharper?

No, because the vector is already sharp. A higher resolution only creates more pixels in the exported raster file, which makes the file bigger and gives a print shop enough pixels.

Last updated: