DPI for Printing: What You Need for Photos and Posters
What DPI is best for printing?
300 DPI is the best setting for prints viewed up close, 150 DPI suits posters, 100 DPI suits banners and billboards run 10 to 30 DPI. The right value drops as the viewer moves back, and you’ll find these targets in most print guides. They aren’t hard rules. They’re ranges that follow viewing distance. That’s the whole idea, and it’s why a billboard can run at 15 dpi.
| Print type | Target DPI | Typical viewing distance |
|---|---|---|
| Photos, flyers, documents | 300 | 12 in (30 cm) |
| Posters | 150 | 24 in (61 cm) |
| Banners | 100 | 36 in (91 cm) |
| Billboards | 10 to 30 | 10 ft (3 m) and farther |
Instantprint says 300 dpi provides high-quality, detailed images and calls 150 dpi the optimum for large-format print (Instantprint: Resolution guide). Imaging Resource notes that billboards print at 15 dpi since nobody views them up close (Imaging Resource: Resolution and viewing distance). The distances in the table come from the formula in the next section.
Don’t chase 300 DPI on a banner. It won’t look better from 3 ft, and the file holds 9 times the pixels of a 100 DPI file (3 x 3 = 9), so it’s slower to send and to process.
The DPI calculator checks any file against these targets, and the FeetToPixels homepage lists the converters for each print size.
How viewing distance decides DPI
The DPI a viewer can use equals about 3,438 divided by the viewing distance in inches. The number comes from visual acuity. 20/20 vision resolves detail of one minute of arc (Wikipedia: Visual acuity), and at a distance d that detail measures d / 3,438 inches.
Printing more dots than the eye resolves adds nothing you can see. Here’s how that works out for 6 distances:
| Viewing distance | In inches | Highest DPI the eye uses |
|---|---|---|
| 1 ft (30.5 cm) | 12 | 286 |
| 1.5 ft (45.7 cm) | 18 | 191 |
| 2 ft (61 cm) | 24 | 143 |
| 3 ft (91.4 cm) | 36 | 95.5 |
| 6 ft (1.83 m) | 72 | 47.8 |
| 10 ft (3.05 m) | 120 | 28.6 |
A 4 x 6 photo held at 12 in lands at 286 DPI, which is close to the 300 DPI target for close-up prints. A poster read from 2 ft needs 143 DPI, which matches the 150 DPI target. At 30 ft (360 in) the figure falls to 9.6 DPI.
The numbers are a ceiling for good eyes, and they aren’t a target. To use the table, measure how far the viewer stands, find the nearest row, and you’ve got the DPI limit. A viewer who’s closer than you planned will see more detail, so keep the 300, 150 and 100 targets when you’re unsure.
How many pixels does each print size need?
Each print size needs its width and height in inches multiplied by the DPI. The table gives 6 common sizes at 300 and 150 DPI.
| Print size | Pixels at 300 DPI | Megapixels at 300 DPI | Pixels at 150 DPI |
|---|---|---|---|
| 4 x 6 in (102 x 152 mm) | 1200 x 1800 | 2.16 | 600 x 900 |
| 5 x 7 in (127 x 178 mm) | 1500 x 2100 | 3.15 | 750 x 1050 |
| 8 x 10 in (203 x 254 mm) | 2400 x 3000 | 7.20 | 1200 x 1500 |
| A4 (210 x 297 mm) | 2480 x 3508 | 8.70 | 1240 x 1754 |
| US Letter (8.5 x 11 in) | 2550 x 3300 | 8.42 | 1275 x 1650 |
| 24 x 36 in (61 x 91.4 cm) | 7200 x 10800 | 77.76 | 3600 x 5400 |
A4 measures 210 mm by 297 mm (Wikipedia: ISO 216), and US Letter measures 8.5 by 11 in, or 215.9 by 279.4 mm (Wikipedia: Letter (paper size)). Millimetres convert at 25.4 mm per inch, so A4 at 300 DPI is 210 / 25.4 x 300 = 2480 pixels wide.
You don’t need a table for other sizes: multiply each side in inches by the DPI, and you’ve got the pixels. Ready-made sizes live on the 4x6 in pixels and 8.5 x 11 in pixels pages. For other sizes, use the pixels to print size calculator, or open the 300 DPI page for the full list.
What happens if your DPI is too low?
A DPI that’s too low makes single pixels visible, so edges turn jagged and fine detail turns soft. Each pixel grows to 1 / DPI inch on paper.
Here’s what that looks like with a 1200 x 1800 pixel file, which is a 4 x 6 in print at 300 DPI. You’ll see the drop at each step:
- Printed at 8 x 12 in, it runs at 150 DPI (1200 / 8 = 150), and each pixel measures 0.169 mm.
- Printed at 24 x 36 in, it runs at 50 DPI (1200 / 24 = 50), and each pixel measures 0.508 mm.
At 50 DPI the eye still resolves single pixels at any distance under 69 in (3,438 / 50), so a poster seen from 2 ft shows a visible grid. It doesn’t take a huge stretch to see it: Adobe warns that enlarging an image to bigger pixel dimensions loses some detail and sharpness (Adobe: Image size and resolution).
The fix is simple: print smaller, or start from a file with more pixels. Don’t stretch the file and hope it’ll hold up, because the pixel size on paper only grows. Instantprint adds that not every job needs 300 dpi, and it suggests checking large artwork at 50% scale on screen (Instantprint: Resolution guide).
How to check a file before you send it to print
Divide the file’s pixel width by the print width in inches to get its DPI. Follow these 4 steps.
- Read the pixel size. In Photoshop, open Image > Image Size and note the width and height in pixels.
- Divide by the print size. A 3000 x 2400 pixel file printed at 10 x 8 in runs at 300 DPI (3000 / 10 = 300).
- Compare with your target. Use 300 for close-up prints, 150 for posters and 100 for banners.
- Preview at the right scale. Zoom the artwork to 50% on screen for large-format files, then look for jagged edges. If you see them, that’s a sign the DPI is too low for the size.
Keep Resample unchecked while you test print sizes. Don’t skip the test when the file looks sharp on screen, because on-screen display ignores the DPI setting. Photoshop then changes only the resolution and print size, and the pixel count stays fixed (Adobe: Image size and resolution).
Enter the pixels and the print width into the DPI calculator if you want to skip the math. You’ll get the DPI in seconds. Then export a test, and ask your print shop for its own file spec before the final order.
Frequently asked questions
Is 200 DPI good enough for printing?
Yes, when viewers stand about 17 in (43.7 cm) or farther away, since 3,438 / 200 = 17.2 in. Use 300 DPI for a 4 x 6 photo you'll hold close, where the eye can resolve about 286 DPI at 12 in.
Do print shops want 300 DPI?
Yes, for standard print. Instantprint advises saving artwork at 300 dpi and a minimum of 150 dpi for large format. Each shop publishes its own specification, so check it before you export.
Can I print a 72 DPI image?
Yes, if it has enough pixels. A 2400 x 3000 file tagged 72 DPI prints at 300 DPI once you set the size to 8 x 10 in. A 576 x 720 file tagged 72 DPI doesn't have enough pixels, and it prints soft at that size.
Is 100 DPI enough for a banner?
Yes, for viewing from about 3 ft (91 cm) or farther, since 3,438 / 36 in = 95.5 DPI. A 6 ft wide banner at 100 DPI needs 7,200 pixels across (72 in x 100).
How many megapixels do I need for an 8 x 10 print?
You need 7.2 megapixels at 300 DPI (2400 x 3000 pixels) and 1.8 megapixels at 150 DPI (1200 x 1500 pixels). Multiply width by height in pixels to get the figure for any other size.